Eagle Pods is a system integration partner for Phase One cameras, Phase One software and Flight Management systems. Phase One cameras are designed exclusively for geospatial and industrial imaging. Developed with leading experts in the field, their cameras offer the world's best image quality, high resolution, dynamic range, color fidelity and geometric accuracy. For pricing please contact us.
Phase One 4 Band Cameras
The Recon-XL camera pod was designed to house the 4-Band Camera system. This solution uses two high resolution Phase One aerial cameras specifically designed for photogrammetric airborne camera platforms. This system uses a combined NIR and RGB camera for capturing and processing 4-Band imagery for agriculture and foresty applicaitons.
Phase One 4 Band Cameras
Eagle Pods is a system integration partner for Phase One cameras, Phase One software and Flight Management systems. Phase One cameras are designed exclusively for geospatial and industrial imaging. Developed with leading experts in the field, their cameras offer the world's best image quality, high resolution, dynamic range, color fidelity and geometric accuracy. For pricing please contact us.
Simplifying Precision 3D Aerial Photogrammetry
Phase One 4 Band Cameras
Eagle Pods is a system integration partner for Phase One cameras, Phase One software and Flight Management systems. Phase One cameras are designed exclusively for geospatial and industrial imaging. Developed with leading experts in the field, their cameras offer the world's best image quality, high resolution, dynamic range, color fidelity and geometric accuracy. For pricing please contact us.
The Camera Genie and consists of a survey-quality GPS and a precision intervalometer. The system works with a variety of cameras and produces an Excel or text file of Image ID, and the Latitude, Longitude and altitude of the aircraft GPS antenna at the instant of exposure. This information can be used to provide a seamless orthomosaic and co-registered Digital Elevation Model (DEM). The basic system uses SBAS (WAAS) corrections in real-time to achieve sub-meter accuracy. Post processing using NGS CORS sites can produce ~10cm accuracies.
System Components
-
Precision Intervalometer
-
Controller
-
PPP Receiver
-
Small size: 15cm x 8cm x 5cm (6” x 3” x 2”)
-
Low cost: Inertial and Lidar components not required for excellent results
-
Simple “Start” / “Stop” operation allows single individual (pilot) control
-
Uninterruptible Power Supply to overcome aircraft power “glitches” 10+ hour operation without charging
Easy Cabin Mounting
The Camera Genie can be placed on a seat
or shelf next to the camera's computer
for easy access in flight
Flight Proven Capability
-
Camera Genie Turns ANY camera (Canon, Nikon, PhaseOne, etc) into an Airborne 3D Mapping System
-
Camera Genie captures precise camera coordinates at the instant of image exposure
-
Simple touchscreen control and timey of any camera used for airborne imagery (adjustable .3 to 99 second interval between exposures
-
Real-time display of coordinate accuracy (Latitude, Longitude and Altitude) in meters
-
Real-time display of satellites uded in computing DGPS position
-
On-screen display of cumulative number of images acquired
-
On-screen alarms showing any image capture failure
-
Flash drive recording capacity exceeding 24 hours
-
Real-time camera geolocation accuracy based on differential GPS (SBAS or Atlas)
-
Ground control, IMU and LiDAR not required for excellent Orthos and DEMs
-
GNSS data saved to USB flash drive for post flight processing